Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
33
(E) 62HM14
Note:
• The SPLIT buttons on the remote control
operate the TV’s POP features.
• You can display only 480i format program
in the main window. Only the audio signal is
output.
• You cannot display the ANT-2 signal source
in the POP window.
• You can choose to output the sound of
either the main or POP program through
the AUDIO OUT jacks (see “Selecting the
Audio OUT sound” on page 54).
• You can choose to hear either the main or
POP audio through the TV speakers. (See
“Switching the speaker audio (main or
POP)” on page 34.)
• HDMI, 720p ColorStream, 480p
ColorStream, and 1080i ColorStream
signals will only display in the POP (right)
window. These signals will not display in the
main (left) window when the TV is in
double-window mode.
• If an HDMI or ColorStream source is being
viewed when you open the POP double-
window feature, the HDMI or ColorStream
source will default to the POP (right)
window.
Main window
(480i only)
POP window
123
456
7
89
ENT
100
0
POWER
RECALL
CHRTN
FAV
FAV
TV
/
VIDEO
+10
PIC SIZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FFREW
SKIP
/
SEARCH
SPLIT
SWAP POP CH
LIGHT
REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOLCH
FA
VORITE
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
G
U
I
D
E
C
L
E
A
R
E
N
T
E
R
POP CH zy
SPLIT
SOURCE
EXIT
POP DIRECT CH
Channel
Number
Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window.
ANT 1
POP
12
MAIN
6
2. Select POP channels in the following two ways:
• To change to a specific channel, press POP DIRECT CH.
While “POP” is on the screen, press the Channel Number
buttons (0–9 and 100).
• To change to the next programmed channel, press POP CH
zy.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 37).
BLOCKED
POP
24
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on page 8).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
ColorStream HD2, or HDMI). The current source will display in
purple.
POP SOURCE SELECT I ON
0 : TV
1
VIDEO
V1 :
2 :
3 :
4 : Color Stream HD1
5 : Color Stream HD2
IDEO
2
VIDEO
3
6 : HDM I
0 - 6 : TO SELECT
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0–6).
To close the POP window:
Press SPLIT again or EXIT.
62HM14(E)26-37 1/24/05, 1:48 PM33