Filter
Top Products
27
EN
1. In the “Wireless” menu, press / to select Network
List, then press OK. A list of existing wireless networks
near the Blu-ray Disc™ player will appear (It may
take several seconds for this list to be created). For
example:
2. Press / to select the desired wireless network, and
press OK to confi rm.
a. If the Blu-ray Disc™ player is connected to an
Unencrypted Wireless Network, a menu similar to
the following will appear:
3. Press
/ to highlight Connect, and press OK. If the
wireless network is functioning, icon and a message
“Connection to XXX...Success” will appear on the TV.
4. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network.
Connection to the wireless Network which you I.
select
The symbols that might appear next to each listed wireless
network in the network list are as follows:
Category Icon Defi nition
Connected
When the Blu-ray Disc™
player is turned on, it will
connect to the wireless
network displaying this symbol.
Typically, this is the last
wireless network connected
before powering down.
*
Indicates that the Blu-ray
Disc™ player is currently
connected to this network.
Saved
The wireless network
properties have been saved
in the Blu-ray Disc™ player’s
memory.
Wireless
Security
The wireless network data is
not encrypted.
The wireless network data
is encrypted; a ‘security key’
must be entered so that the
Blu-ray Disc™ player can
share data over the network.
The wireless network data
is encrypted; the encryption
scheme is not supported by
the Blu-ray Disc™ player.
Wireless
Protocol
a
The wireless network
supports 802.11a
b
The wireless network
supports 802.11b
g
The wireless network
supports 802.11g
n
The wireless network
supports 802.11n
The wireless router supports
the WPS standard.
Signal
Strength
Strong Signal
Good Signal
Medium Signal
Weak Signal
No Signal
WiFi-me
Connect WPS Pin
Name and Password are case-sensitive
Cancel
WiFi
WiFi
Network List
WiFi WiFi-me*
Panda
dlink_media
b
WiFi
g
NTGR 11g
b
WiFi
g
Airport_SN
b gn
a
a
Manual
WiFi Protected Setup (WPS)
IP Settings
Network List
Wireless
Customizing the Function Settings