Filter
Top Products
English
25
REGZA-LINK controls continued,
REGZA-LINK menus
REGZA-LINK one touch play
When connected equipment is switched on REGZA-LINK
will automatically detect the television through the input
selection. If the television is in standby it will be switched
on automatically. This feature is selected in the REGZA-
LINK setup menu.
NOTE:
Even if the equipment is showing a menu the
television may automatically show the input source.
NOTE:
This feature is dependent on the connected
equipment and television setting.
REGZA-LINK system standby
This feature automatically switches connected equipment
into standby when the television goes into standby and
conversely for the television to switch into standby when
connected equipment goes into standby. It is selected in
the REGZA-LINK setup menu.
NOTE:
This feature is dependent on the connected
equipment and television setting.
REGZA-LINK system audio control
Using the Speaker Preference feature allows the
televisions remote control to adjust the volume or mute
the sound of the speakers connected to the television via
an AV amplifier.
Ensure that the connected AV amplifier and REGZA-LINK
equipment are selected in the input source selection and
that the Speaker Preference is set to Amplifier in the
REGZA-LINK setup menu.
NOTE:
When the AV Amplifier is switched on, its input
source changed or the volume adjusted, the sound will be
output from the AV Amplifier’s speakers even if TV
Speakers has been selected. Turn the television off then
on again to output the sound from the TV’s speakers.
The full function may not work and is dependent on the
Amplifier being used.
By activating the Enable REGZA-LINK feature in the REGZA-LINK setup menu individual REGZA-LINK
features can then be activated.
REGZA-LINK
Enable REGZA-LINK On
TV Auto Input Switch On
TV Auto Power On
Auto Standby On
Speaker Preference TV Speakers
MENU
Back
EXIT
Watch TV
Enable REGZA-LINK
When Enable REGZA-LINK is set to On it allows the
following functions to be enabled by selecting On.
Press MENU and
z
or
x
to select the REGZA-
LINK menu.
1
Press
e
to highlight Enable REGZA-LINK, then
z
or
x
to select On or Off.
2
gg