Filter
Top Products
25
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Adjusting the picture
Adjusting the picture quality
You can adjust the picture’s contrast, brightness, sharpness, color, and
tint. Your picture quality adjustments are stored automatically in the
TV’s memory. You can keep these settings or choose preset options in
the PREFERENCE menu (see “Selecting the color temperature”
below, and “Selecting the picture preference” on the next page.)
To adjust the picture quality:
1. Press MENU.
2. Press
x or • to highlight the PICTURE menu.
3. Press
y or z until the quality you want to adjust is highlighted.
MOVE
[
]
[
]
CONTRAST 100
BRIGHTNESS 50
SHARPNESS 50
COLOR 50
TINT 0
RESET
PICTURE
ADJUST
–
+
4. Press x or • to adjust the level, as described in the following table:
Selection Pressing
Contrast Lower Higher
Brightness Darker Lighter
Sharpness Softer Sharper
Color Paler Deeper
Tint Reddish Greenish
Selecting the color temperature
You can change the picture quality by selecting from three preset color
temperatures—cool, medium, and warm.
To select the color temperature:
1. Press MENU.
2. Press
x or • to highlight the PREFERENCE menu.
3. Press
y or z to highlight COLOR TEMPERATURE.
MOVE
[
]
[
]
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
PREFERENCE
SELECT
4. Press x or • to highlight the mode you prefer, as described in the
following table:
Mode Picture Quality
Cool Blueish
Medium Neutral
Warm Reddish
Note:
To reset the picture (and audio)
adjustments to the factory settings,
select RESET in the PICTURE menu,
and then press •.
}
stT S
MENU