Toshiba D-R4SC DVD VCR Combo User Manual


 
37
Introduction
Connections
Basic Setup
6
Press / to select Auto, then press
SELECT/ENTER.
The recorder starts scanning and active channels are
stored in the recorder in ascending order.
The display returns to the previous screen after setting
is completed.
Channel set Cable manual 1/13
Home CH Add/Erase
1
2
Erase
Erase
3
4
Erase
5
Add
6
Erase
7
Erase
8
Add
9
Erase
e.g.
10
Erase
Add
Adding or erasing channels
Adding channels
If a desired channel cannot be scanned automatically
because of a weak signal, it can be added to the
memory.
Erasing channels
You can erase a stored channel from the memory.
1) Select Manual at step 6.
2) Press
/ to select a channel you want to add
or erase.
For cable channels, refer to the chart below page.
3) Press ADJUST (-/+) to select Add or Erase.
Add : Adding channels
Erase : Erasing channels
4) Press SELECT/ENTER.
The confirmation message appears.
Press the
/ buttons to select Ye s , then press
the SELECT/ENTER button.
Channel reference
Number on the recorder CH NUMBER 1 2 3456789
Corresponding channel number TV 23456789
Ccable STD (HRC/IRC) 1
(A-8)
2345
(A-7)
6
(A-6)
789
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10 11 12 13 A B C D E F G H I J K L M N O P Q
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
R S T U V W AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 ––…
PP QQ RR SS TT UU VV WW XX YY ZZ AAA BBB 65 66 67 68 69 70 71
93 94 95 96 97 98 99 100 101 102 103 121 122 123 124 125
–––––––––––…–––––
93 94 A-5 A-4 A-3 A-2 A-1 100 101 102 103 121 122 123 124 125
Cable signals
STD (standard) cable TV signals
HRC (Harmonic Related Carriers) cable TV signals
IRC (Incremental Related Carriers) cable TV signals
IRC is also called ICC (Incremental Coherent Carriers)
SELECT/
ENTER
A: Initial settings is complete. Go to B: Output sound setting. ( page 38)