Filter
Top Products
87
Recording Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
EN
PBC function for Video CDs
This unit conforms to ver.1.1 and ver.2.0 of the Video
CD standard playback control (PBC) function. This
enables you to play back interactive software using
menu screens. Refer to the information accompanying
the Video CD.
Ver.1.1 (without PBC function): You can still enjoy
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “PBC ON” will appear on
the screen and display when playing back a Video CD
with the PBC function.
Notes
• When playing back Video CDs with the PBC function,
“Pbc” is displayed instead of the playing back time and
current track indications on the front panel display.
• Some operations cannot be performed unless the function
is cancelled either automatically or intentionally by you.
• Operations that are not available when the PBC function is
set to “ON” are indicated by the following symbol in this
manual:
Playing back a Video CD using
the title menu
1) When playing back a Video CD with the PBC
function, the title menu will appear
automatically.
2) Press the Number buttons to select the desired
title.
Playback will start at the selected title.
3) Press [RETURN] to go back to the title menu.
Note
• While the On-Screen Display appears, you cannot perform
steps 2 and 3.
Cancelling and Recalling the PBC
function
Insert a Video CD.
1) In stop mode, press [SETUP].
2) Select “CD Playback Mode” using [K / L], then
press [ENTER].
3) Select “PBC (Video CD only)” using [K / L],
then press [ENTER].
4) Select “OFF” using [K / L], then press
[ENTER].
5) Press [SETUP] to exit.
To recall the PBC function, select “ON” in step 4
above.
Note
• The default setting of “PBC (Video CD only)” is “ON”.
CD Playback Mode
Random Play
Program Play
PBC(Video CD only) ON
Slide Show 5 sec