Filter
Top Products
14
5.375 x 8.375 ver 2.3
Using the LCD monitor
You can use the mobile LCD monitor in mirror mode or extended
mode. Settings may vary depending on your operating system.
For Microsoft
®
Windows
®
7
Press the Windows
®
key ( ) + P to switch between different
modes as shown below.
For Microsoft
®
Windows
®
XP and Microsoft
®
Windows Vista
®
Right-click the “TOSHIBA Mobile LCD Monitor” icon in the
system tray of your Windows
®
desktop to configure the display
settings.
Adjusting the brightness
Press the Brightness Up/Down buttons to adjust the brightness
level of the monitor display. Brightness levels may also vary
depending on the power source used. See the table below:
Brightness level options
To purchase an optional AC adaptor (AC adaptor sold separately, part
number PA3743U-1ACA), visit Toshiba’s Web site at
accessories.toshiba.com.
Disconnecting the LCD monitor
1 Press and hold the Power button for approximately two
seconds to turn the LCD monitor OFF.
❖ For Microsoft
®
Windows
®
7 only, you may also turn the
monitor OFF by pressing the Windows key () +
P, and
then selecting Disconnect Projector.
❖ For Microsoft
®
Windows Vista
®
and Windows
®
XP, you
may select OFF by right-Clicking the “TOSHIBA Mobile
LCD Monitor” icon in the system tray.
USB Power
25%, 50%
AC Power:
25%, 50%, 75%, 100%