Filter
Top Products
Chapter 2: Connecting your TV
1
Connecting a satellite receiver
with ColorStream
®
(component
video)
Your TV has one set of ColorStream
®
(component video)
inputs.
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
COMPONENT VIDEO
L
R
Satellite
IN
P
B
P
R
Y
You will need:
coaxial cables
standard audio cables
component video cables
You can connect the component video cables (plus
audio cables) from the satellite receiver to the set of
ColorStream HD terminal on the TV. The ColorStream
HD terminal can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems. A 1080i
signal will provide the best picture performance (1080p
is not supported).
If your satellite receiver does not have component
video, connect a standard A/V cable to VIDEO on the
back panel.
To view satellite programs using the component
video connections:
Turn on the satellite receiver. Select the ColorStream HD
video input source on the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
•
•
•
−
−
*
Camcorder
Connecting a camcorder
You will need:
standard A/V cables
For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO on the TV back instead.
VIDEO
AUDIO
OUT
L
R
To view the camcorder video:
Select the VIDEO video input source on the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
•
−
*
Satellite receiver with component video
From
satellite dish