Filter
Top Products
33
EJECT
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
LOADING AND UNLOADING A VIDEO CASSETTE
UNLOADING
Pull the cassette out.
1
LOADING
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See NOTE on page 40).
NOTES:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is “OFF”.
OR
2
To unload a video cassette, press the EJECT
button on the remote control, or press the
STOP/EJECT button on the TV/VCR twice.
The first press will stop the tape in any mode. The
second press will eject the tape.
Use only video cassette tapes marked
.
2
1
STOP/EJECT
5E20101B P20-33 14/08/2003, 15:5033