Filter
Top Products
47
Press the PLAY Button on the
playback VCR, then press the
PAUSE/STILL button.
Release the recording
pause and the playback
simultaneously to begin the
duplicating process.
NOTES:
•
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
CONNECTION TO ANOTHER VCR
DUPLICATING A VIDEO TAPE
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
LINE
Playback Camcorder
3
4 5
2
1
If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make
all connections before turning on the power.
To AUDIO
OUT
To VIDEO
OUT
Playback VCR
Audio/Video Cord (not supplied)
To Video/Audio In
Audio/Video Cord (not supplied)
To AV Jack
Recording TV/VCR
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
Recording TV/VCR
To Audio In
To Video In
Press both the REC buttons
at the same time on the
remote control of the TV/VCR,
then press the PAUSE/STILL
button.
Press the INPUT SELECT button to select
AUDIO/VIDEO input position. "LINE" will
appear on the screen.
REC
PAUSE/STILL
PAUSE/STILL
PAUSE/
STILL
PLAY
INPUT SELECT
PAUSE/
STILL
5E20201A P44-BACK 12/11/2002, 10:3247