Filter
Top Products
37
CALL
MENU
–
SET/TR
+
ENTER
SP/SLP
CANCEL
MUTE
SLEEP
POWER
CLOSED
CAPTION
CHANNEL
RETURN
DIGITAL
TRACKING
0
8
7
9
6
5
4
3
2
1
PROGRAM
PAUSE/STILL
TIMER
REC
STOP
PLAY
FF
REW
ZERO
RETURN
COUNTER
RESET
INPUT SELECT
SKIP SEARCH
REC
EJECT
VOL+
VOL–
CH–
CH+
SPECIAL PLAYBACK
Press the PLAY button to resume normal viewing
speed.
Press the PLAY button to resume normal viewing
speed.
To visually search backward, press the REW button
once or twice in the PLAYBACK mode.
To visually search forward, press the FF button
once or twice in the PLAYBACK mode.
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the FF or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When
pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP or SLP)
during recording. See chart below.
To rewind or fast forward a tape, press the STOP button, and then press the REW or FF button.
SPEED SEARCH TIMES
PICTURE SEARCH SPEED
PRESS
TWICE
5 X
15 X
TAPE SPEED
PRESS
ONCE
3 X
9 X
SP (Standard Play)
SLP (Super Long
Play)
NOTES: • Best results during speed search and still playback can be obtained with video cassettes recorded in the
“SLP” mode.
•The audio output is muted during Speed Search and Still.
•A few noise bars will appear on the TV screen during Speed Search and Still.
•To prevent damage to the tape, Still and Speed Search mode is automatically changed to the Playback
mode after 5 minutes.
For example: 1 press: 30 seconds of tape
2 press: 60 seconds of tape
3 press: 90 seconds of tape
Press the SKIP SEARCH button in the PLAY mode. The TV/VCR will
search forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of the SKIP SEARCH
button (maximum six presses) and then resume normal playback.
REW FF
SKIP SEARCH
Press the PAUSE/STILL button in the
PLAYBACK mode.
Press the PLAY button or PAUSE/
STILL button to resume normal
playback.
PAUSE/STILL
SKIP SEARCH
TO WATCH STILL PICTURE
5E20101B P34-43 14/08/2003, 15:5037