Filter
Top Products
30
TV operation
Labeling channels/Labeling the video
input sources
Channel labels appear above the channel number display each time
you watch the TV, select a channel, or press DISPLAY. You can
choose any four characters to identify a channel.
The video label feature allows you to label each input source for your
TV.
Labeling channels
Select a channel you want to label.
Press MENU in the TV/VCR mode, then press
or to select OPTION menu. Press or
to select “CH LABEL”.
1
2
OPTION
TIMER OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
: SELECT : ADJUST
RETURN : END
Press or to display the CH LABEL menu.
Press
or to select “SET”, then press
ENTER.
If you return to OPTION menu,
select “OPTION MENU” then press
.
3
Press or to enter a character in the first
space. Press
or repeatedly until the
character you want appears on the screen.
Press
.
4
Note:
The character will change as below.
5
Repeat step 4 to enter the rest of the charac-
ters.
If you would like a blank space in
the label name, you must choose
an empty space from the list of
characters; otherwise, a dash will
appear in that space.
Press RETURN to make the menu screen
disappear.
Repeat steps 1-6 for other channels. You can
assign a label to each channel.
To erase channel labels:
Follow above steps 1-2, then select “CLEAR” in the step 3.
Then press ENTER. Repeat this procedure for all channel
labels which you want to erase.
ENTER
0–9
CH /
C/D/B/A
MENU
6
7
RETURN
Labeling the video input sources
Press MENU in the TV/VCR mode, then press
or to select OPTION menu. Press
or to select “VIDEO LABEL”
Press
or to display the VIDEO LABEL
menu. Press
or to select the video source
you want to label, then press
or
to select label name.
1
2
OPTION
TIMER OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
: SELECT : ADJUST
RETURN : END