Filter
Top Products
21
Connections
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. Copyright 1992-1997
Dolby Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
Select:
Page
“Bitstream”
“Audio Out Select”
Recording system
58
61
43
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
D
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an
amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Connecting to an amplifier equipped with Dolby Surround Pro Logic
ANALOG
YP
B
P
R
VIDEO
S
AUDIO OUT
VIDEO OUT
BITSTREAM/PCM
DIGITAL
L
COAXIAL
OPTICAL
ANALOG
R
Connect either.
To OPTICAL
type digital
audio input
Amplifier equipped with a
Dolby Digital decoder
Optical digital cable
75 Ω coaxial cable
To COAXIAL
type digital
audio input
ANALOG
YP
B
P
R
VIDEO
S
AUDIO OUT
VIDEO OUT
BITSTREAM/PCM
DIGITAL
L
COAXIAL
OPTICAL
ANALOG
R
Amplifier equipped with
Dolby Surround Pro Logic
To audio input
Audio cable
*
To ANALOG AUDIO OUT
Be sure to set “Audio Out Select”
to “Analog 2ch” when you enjoy
sounds of Dolby Surround Pro
Logic using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
• Make the following setting.
On-screen display
Select:
“Analog 2ch”
“Audio Out Select”
58
61
Page