Filter
Top Products
Customizing the Function Settings(continued)
Setting details
Default
If you want to return the initial language setting
such as Language, Video, Audio and etc. to the
factory default, select “Yes” from the following
menu.
Notes
• When you reset the DVD video player to the
factory default, the DVD video player will take
3-5 seconds to reset.
• The DVD video player can also be reset to the
factory default by pressing the STOP button on
the front panel for 5 seconds in tray OPEN
mode.
Use Default Settings
Some DivX Video-On-Demand files require
registration code, please get the code of your
DVD video player as follow:
Note
This registration code is for DivX Video-On-
Demand only. Do not apply this code for other
applications or websites.
DivX Registration
®
®
Press to select the Parental from 1 to
8. Parental one (1) has the most restrictions
while Parental eight(8) can virtually playback all
DVD software.
If the DVD disc has been designed to
temporarily cancel the Parental Level, the screen
will change depending on which disc is played.
If you select “ YES ” with the ENTER button,
“ Enter Password ” screen will appear. Input the
4- digit password as you have set then followed
by ENTER button and playback will start. If
“ NO ” is selected, press the OPEN/CLOSE
to remove the disc.
5
)
6
) Press OPEN/CLOSE button to activate the
Parental Level
setting.
/
Set Password
DVD
New Password can be set to replace the
default password.
1) Press SETUP button.
3)Press button, then the button to select
Set Password.
4)Press ENTER button. “Enter Password” screen
will appear.
2)Press
button to select the Rating.
/
/
5) Press the number buttons to input the current
password (If the password has not been set
yet after you purchase this unit, it is “8888”).
Then press ENTER.
6) Press ENTER button again, “Enter New
Password” screen will appear. Press the
number buttons to input the new password.
7) Press ENTER button. Now your new password
has been set.
Be sure to remember this number!
If you forget the password, you can erase
your current password by pressing
number button 8 on the remote control
four times, then press ENTER button to
confirm the setting.
PASSWORD: 8888
Notes
• If you input wrong password, press CLEAR
button
and re-enter your 4-digit password again
• You cannot play DVD discs rated higher than the
level you selected unless you cancel the
parental
lock function.
27
Function setup