Filter
Top Products
18
Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see
43
.
Connecting to a TV (Using the SCART socket)
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Audio cable
To audio
input
To audio
input
(yellow)
To VIDEO
OUT
(yellow)
To 2ch AUDIO OUT
(R: red, L:white)
Normal TV
Connecting to a TV (Using the phono type jacks)
To AV
To SCART input
SCART cable
Normal TV
• Make the following setting.
On-screen display
Select:
Page
“PCM” or “Raw”“Digital Out”
52
57
“Video Output”
CVBS
RGB
* YUV
* Provided Progressive scan off.
52
56
• Make the following setting.
On-screen display
Select:
Page
“Video Output”
CVBS
RGB
* YUV
* Depends on your TV capability.
52
56