Filter
Top Products
Front Panel
Figure 1.SD-R5002 DVD Writeable Drive Front Panel
Loading
Tray
Load disc using tray.
Busy Light
LED
The LED lights green or amber when the drive is operating (LED is amber when drive is
writing.)
Eject
Button
The Eject button is used to open the disc tray so you can install or remove a disc.
Emergency
Eject Hole
The emergency eject hole is to be used only when the Loading Tray will not open when
Eject button is pressed.
System Requirements
The DVD Writeable kit requires the following (If kit uses Nero6 software):
• Microsoft Windows 98SE, XP, 2000 or ME
• CPU Requirements:
300MHz minimum
800MHz for capturing to hard disc
1.6GHz for capturing to DVD video
• 64MB RAM, 128MB RAM (for video editing)
• Hard Drive Space:
500MB minimum
4.8GB for DVD Images
• Screen solution 800 x 600 pixel minimum, 16 bit color depth or higher
• Windows Internet Explorer 4.0 or higher
• PCI sound card, USB audio box or motherboard built-in audio device
• TV tuner or video capture board for analog recording