Filter
Top Products
87
Maintenance
CONTENTS
Notes
• When the CALL button is pressed, the “Lamp
time” (the approximate amount of time the lamp
has been used) is displayed.
38
• The lamp should be replaced if the total working
time exceeds about 1,000 hours.
When the “Lamp time” is displayed 1000 hours,
the icon and a message appear. They will
disappear when you do some operation.
• Attach the lamp cover firmly after replacing the
lamp. If it is not set correctly, the power will not
turn on.
• Use a new lamp when replacing it.
• The lamp is made of glass and is very fragile. Do
not touch the lamp with your bare hands and do
not jolt or damage it. Do not use an exhausted
lamp.
• Dispose the exhausted lamp as toxic wastes.
Lamp replacement (continued)
5
Load a new lamp.
Slide until it hits the bottom and tighten the two fixed screws.
6
Attach the lamp cover.
Slide the cover in place and tighten two
screws.
Reset the lamp timer.
Refer to the lamp instructions for resetting.
7
AC IN
3
2
1