Filter
Top Products
72
CONTENTS
Adjustments &
Settings
MENU
ON/STANDBYINPUT
L-CLICK R-CLICK
ENTER
KEYSTONE
AUTO
SET
EXIT
PIP
FREEZE
MUTECALL
RESIZE
VOLUME/ADJUST
TEMP LAMP ON
BUSY FAN
KEYSTONE
SET
AUTOAUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
5
4
5
4
TEMP
LAMPON
BUSY FAN
ON/STANDBY
KEYSTONE
SET
AUTOAUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
ON/STANDBY
LASER
FULL MENU settings – Factory reset mode (continued)
Press ENTER.
The settings are reset to the factory default settings according
to the conditions selected in step 3.
5
Notes
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
• When the “Factory reset mode” menu is executed, the adjustments and settings for all the
inputs return to the factory default settings. (It is impossible to reset them for each input
source.)
4
After the settings are finished, press EXIT.
The menu screen disappears.
ENTER
ENTER
EXIT
EXIT
Remote control
Control panel
(Main unit side)