Filter
Top Products
11
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or
converters, you first have to program your remote control. (See
“Programming the remote control for use with a VCR, DVD player, or
cable TV converter” on page 12.)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two “AAA” size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see “Programming the
remote control for use
with a VCR, DVD
player, or cable TV
converter” on page
12). The buttons
shown at right will then
control the VCR. Press
the VCR button first.
Using the remote control with a VCR, DVD player, or cable TV converter
Note:
The TV remote control may or may not
operate your VCR, DVD player, or cable TV
converter. Refer to the owner’s manuals
supplied with the equipment to see which
features are available. In addition, the original
controllers may have features not available on
this remote control. If you would like to
continue to use these features, you may want
to use the original remote control.
Cautions:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote control
for a long time, remove the batteries.
Using the
Remote Control
Power
Enter
VCR
Channel
Numbers
Play
Fast Forward
Rewind
TV/VCR
Record
Stop
Pause/Still
VCR CH ▲/▼
To control a DVD
player:
Program the remote
control to recognize the
brand of your DVD
player (see
“Program
ming the
remote control
for use
with a VCR, DVD
player, or cable TV
converter” on page 12).
The buttons shown at
right will then control
the DVD player. Press
the DVD button first.
Power
Number
buttons
Play
Fast Forward
Rewind
Stop
Pause/Still
DVD Skip
/
DVD
Channel +/–
OSD
DVD Clear
TOP Menu
DVD Menu
ENTER
DVD Menu /
DVD MENU ▲/▼
3M70101B/E P07-16 5/3/03, 2:59 PM11