9
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
Connecting a DVD player/satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Note:
You can use a standard video cable instead of
the S-video cable, but the picture quality will
decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections only
and remove the standard video cable.
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Connecting
your TV
Connecting a DVD player with ColorStream
®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record from one source while watching a
program from another source. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compat-
ible DVD player, such as a Toshiba DVD player with ColorStream
®
, can
greatly enhance picture quality and performance.
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
IN
OUT
VIDEO
IN from ANT
CH 3
CH 4
OUT to TV
AUDIO
LR
OUT
AUDIO
OUT
VIDEO
COLORSTREAM
YCbCr
L
R
S-VIDEO
TM
VIDEO
Y
P
B
P
R
AUDIO
L/MONO
R
VIDEO
IN OUT
ANT (75Ω)
VIDEO 1 VIDEO 2
AUDIOS-VIDEO
L/MONO
R
VIDEO
Y
P
B
P
R
AUDIO
L/MONO
R
VIDEO
IN OUT
ANT (75Ω)
VIDEO 1 VIDEO 2
AUDIOS-VIDEO
L/MONO
R
IN
OUT
VIDEO
IN from ANT
CH 3
CH 4
OUT to TV
AUDIO
LR
Satellite IN
S-VIDEO
OUT
AUDIO
L
R
DVD player/ Satellite Receiver
TV
Stereo VCR
To satellite
To antenna
DVD player with ColorStream
®
TV
Stereo VCR
To antenna
Note:
The ColorStream inputs on this TV are for use
with devices that output 480i interlaced
signals ONLY. This TV will not accept or
display 480p or 720p progressive scan
signals or 1080i interlaced high-definition
signals. If you connect a high-definition set-
top receiver, 480p progressive scan DVD
player, or other similar device to the TV’s
ColorStream inputs, YOU MUST SWITCH
THE DEVICE’S OUTPUT TO 480i INTER-
LACED MODE FIRST. Failure to do this will
cause a poor picture or no picture to display.
3M70801A/E P07-16 23:4:03, 15:059