Filter
Top Products
36
Selecting the color temperature
Change the picture quality by selecting from three preset color tem-
peratures—cool, medium, and warm—as described in the following
table:
To select the color temperature:
1. Press MENU, then press
or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight COLOR TEMPERATURE.
3. Press
or to highlight the mode you prefer.
4. Press EXIT to return to normal viewing.
Using the CableClear
®
feature
CableClear
®
reduces visible interference in your TV picture. This
is useful when receiving a broadcast with a weak signal (especially a
Cable channel) or playing a video cassette or disc damaged by
repeated use.
To turn on the CableClear
®
feature:
1. Press MENU, then press or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight CableClear.
3. Press or to select ON.
To turn off the CableClear
®
feature:
Select OFF in step 3.
Selecting the Scan Velocity Modulation (SVM)
The SVM feature enhances picture contrast and sharpness. This
feature has three modes: HIGH, LOW, and OFF.
To select the SVM feature:
1. Press MENU, then press
or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight SVM.
3. Press or to select the mode you prefer.
To turn off the SVM:
Select OFF in step 3.
Mode Picture Quality
COOL Blueish
MEDIUM Neutral
WARM Reddish
Menu
Exit
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ONCOOL
COOL
COOL / MEDIUM / WARM
1080i
HIGH
Note:
SVM is not required when viewing some
high-quality video material. If you are
watching high-quality video material, you may
want to set SVM to OFF.
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ON
COOL
1080i
HIGH
HIGH / LOW / OFF
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ON/OFF
COOL
1080i
HIGH
Using the TV’s
Features
J3S30521A(E)_P31-37 25/04/2005, 2:29 AM36