Toshiba 27D46 CRT Television User Manual


 
7
Appendix
Using the TVs
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
IN
OUT
VIDEO
IN from ANT
CH 3
CH 4
OUT to TV
AUDIO
LR
You will need:
two coaxial cables
one set of standard A/V cables
Note:
If using a mono VCR, connect L/Mono to VCR
Audio OUT using only one audio cable. For
better picture quality, if your VCR has S-video,
you can use an S-video cable instead of the
standard video cable. Do not connect both an
S-video cable and a standard video cable at
the same time or the picture performance will
be unacceptable.
Connecting a VCR
This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
Cable Lead-in
from cable box
or antenna
TV
Stereo VCR
The unauthorized recording, use, distri-
bution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subject you to civil and criminal
liability.
Connecting
your TV
NOTICE: RISK OF
EQUIPMENT DAMAGE!
Do not plug in any power cords
until you have finished connecting
all equipment.
Connecting your TV
A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use F connectors.
Standard A/V (audio/video) cables are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
S-video cables provide better picture performance than standard
video cables. S-video cables can only be used with S-video
compatible components.
Component video cables provide better picture performance than
S-video cables. Component video cables can only be used with
component video compatible components.
Digital audio coaxial cable is for use with digital audio equipment
that has digital audio output (see page 13.)
ANTENNA
Coaxial Cable
AUDIO
Cables
VIDEO
Cable
S-Video
Cable
Component video
Cables
DIGITAL AUDID
Coaxial Cable
J3W41121A(E)_P07-13 14/03/2006, 3:30 PM7