Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix Index
13
Using the remote control
Preparing the remote control for use
Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD
players, and HTIBs (home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba devices. See pages 14 and 17.
If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed
to operate:
You can program the TV remote control so it will operate the other device. See pages 15–16.
Installing the remote control batteries
1 Remove the battery cover from the back of the remote control.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into
a fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
Squeeze tab
and lift cover.
2 Install two “AA” size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
3 Reinsert the battery cover in the remote control until the tab snaps.