Filter
Top Products
23
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix Index
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Numbers (0–9, 100).
3. Press CH RTN. The previous channel will display.
Each time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned the TV to.
Programming your favorite channels
The favorite channel feature allows you to use the FAV z/FAVy keys
to cycle through your favorite channels only, skipping over channels
you do not usually watch.
You can program up to 12 of your favorite channels into the favorite
channel memory.
To program a channel into the favorite channel memory:
1. Tune the TV to a channel you want to program as a favorite
channel.
Note: The TV must be in “CABLE” mode to program a cable
channel and in “TV mode” to program an antenna channel.
Select TV/CABLE in the SET UP menu.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight FAVORITE CH, and then press • to
open the FAVORITE CH menu.
4. Press x or • to highlight SET, press z, and then press EXIT.
MOVE
[
]
[
]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
SET UP
START
SELECT
[
] [
]
FAVORITE CH
[SET] CLEAR
256
11
0000
0000
[TV: CYAN, CABLE: BLUE]
SET UP
SET
5. Repeat steps 1–4 for up to 12 channels.
To select your favorite channels:
Press FAV z or FAVy on the remote control.
Note: You can still use CH yz to cycle through the channels you
programmed into the “regular” channel memory on page 19.
To clear a channel from the favorite channel memory:
1. Tune the TV to a channel you want to clear from the
favorite channel memory.
2. Press MENU, and then press x or • until the
SET UP menu appears.
3. Press y or z to highlight FAVORITE CH, and then
press • to open the FAVORITE CH menu.
4. Press x or • to highlight CLEAR, press z, and then press EXIT.
5. Repeat steps 1–4 for other channels you want to clear from the
favorite channel memory.
*The FAV z/FAV y keys function
as menu x/ • keys when a
menu is on-screen.
SELECT
[
] [
]
FAVORITE CH
SET [CLEAR]
256
0
0000
0000
[TV: CYAN, CABLE: BLUE]
SET UP
CLEAR
Note:
• Once programmed, antenna channels
appear in light blue text and Cable
channels appear in dark blue text in the
FAVORITE CH menu (shown at left).