Filter
Top Products
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
29
Changing the location of the PIP window
With the TV in PIP mode, press LOCATE to change the location of
the PIP window on-screen. Every time you press LOCATE, the PIP
window changes position counter-clockwise.
Freezing the PIP display
With the TV in PIP mode, press STILL to freeze the PIP display. The
PIP picture becomes still, and is outlined in red on-screen. Press
STILL again to restore the moving picture (outlined in green).
Still
Watching multi-window PIP
The multi-window PIP feature provides a quick on-screen overview of
all channels programmed into the TV’s memory (see “Programming
channels into the TV’s memory” on page 17). The channels appear
continuouly in six small windows across the bottom of the screen.
Note: LOCATE, SWAP, PIP CHANNEL
yz, SOURCE, and
STILL do not function in multi-window PIP mode.
To view multi-window PIP:
Press PIP a total of three times (the first press displays a 1/9-size
window; the second press displays a 1/16-size window; and the
third press displays multi-window PIP).
The TV cycles through all of the programmed channels, showing a
few seconds of each channel, and then freezes the image and moves on
to the next channel, in a continuous cycle. The channel number
appears above each PIP window.
A
14 23 27 30 43 56
X
To turn multi-window PIP off:
Press PIP again, or change the channel.
Note:
Multi-window PIP displays channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable).
ADV/
PIP CH
ADV/
PIP CH
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
SWAP
PIP CH
CT-9946
SOURCE
PIP
STILL
LOCATE
Note:
If V-Chip blocking is enabled when
you view multi-window PIP, channels
exceeding the rating limits will appear
as a black window with a red “X.”