Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
46
(E) 34HF84
CHANNELVOLUMEMENU
TV/VIDEO
P
Selecting the video input source
Press the TV/VIDEO on the remote control or the TV to view a signal
from another device connected to your TV, such as a VCR or DVD
player (see illustrations below). You can select ANT 1, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, HDMI,
or ANT 2 depending on which input jacks are used for connecting the
devices (see “Connecting your TV” on page 7).
SOURCE
0:
1:
2:
3:
4:
ANT 1
HDM I
VIDEO 1
VIDEO 2
V
Color Stream
5:
6
:
ANT 2
7
:
IDEO
HD1
Color Stream
HD2
3
SELECTION
0
-
7 TO SELECT:
SOURCE
ANT 1
HDM I
VIDEO 1
VIDEO 2
V
Color Stream
ANT 2
IDEO
HD1
Color Stream
HD2
3
SELECTION
TV / V I DEO : TO SELECT
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– – – : Uses the default label name
VCR: Video cassette recorder
DVD: DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then
press x or • until the
CUSTOM menu appears.
2. Press y or z to highlight
VIDEO LABEL.
3. Press ENTER to display the VIDEO LABEL menu.
4. Press y or z to highlight the video source you want to label and
then press ENTER.
5. Press y or z to select
the desired label for
that input source.
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press ENTER.
7. To exit the menu, press EXIT.
Note:
• When ColorStream HD 1 or HD 2 is
selected, the video OUT jack does not
output a signal. To receive a video OUT
signal, use a video or S-video IN
connection instead of the ColorStream
connection.
• If you select ColorStream HD1 or
ColorStream HD2 while the POP picture is
active, the image signals other than 480i
format are muted.
123
456
7
89
ENT
100
0
POWER
RECALL
CHRTN
FAV
FAV
TV
/
VIDEO
+10
PIC SIZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FFREW
SKIP
/
SEARCH
SPLIT
SWAP POP CH
LIGHT
REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOLCH
FAVORITE
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
G
U
I
D
E
C
L
E
A
R
E
N
T
E
R
TV/VIDEO
MENU
yzx •
EXIT
TV/VIDEO
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-7 to change)
Pressing TV/VIDEO on the TV changes
the current signal source
TV front panel
Please note the following regarding
the HDMI source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
an HDMI or DVI device to the HDMI
input” on page 14 for details.
ENTER
MOVE::STARTENTER
ON T I MER
CUSTOM
SLEEP T I MER
00h00m
0h00m
CC OFF
FAVOR I TE CH
SHADED
CH LABEL I NG
V I DEO LABEL
BACKGROUND
V I DEO1
V I DEO LABEL
– – –
V I DEO2
VCR
DVD
DTV
SAT
CBL
V I DEO3
ColorStream
HD1
ColorStream
HD2
HDM I
CUSTOM MENU
SELECT::SETENTER
#01E43-47_34HF84 5/11/04, 1:59 PM46