Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
29
(E) 32HF72 36HF72
Watching PIP/double-window
The PIP/double-window feature allows you to watch two pictures at
the same time. The sub-picture can be a TV broadcast or come from
an external source, such as a VCR.
To display a TV broadcast as a sub-picture:
1. Select the program you want to watch.
2. Press PIP once to display a small picture. A window 1/9 the size
of the screen will appear. Press PIP a second time to display a
double-window.
PIP
6
3. Press PIP CH y z to choose the
program you want to be displayed
as a sub-picture.
If the V-CHIP feature is active and
you try to watch a TV program
that exceeds the rating limits you
set, the TV will enter into the
program block mode. See “Using
V-CHIP menu” on page 33.
To display a picture from an external source as a sub-picture:
1. Make sure you have connected the external source equipment
properly. For more information, see the “Connecting your TV”
on page 7.
2. Turn on the TV and select the program you want to watch.
3. Press PIP once to display a small picture. A window 1/9 the size
of the screen will appear. Press PIP a second time to display a
double-window.
4. Press SOURCE repeatedly to select the input source (TV,
VIDEO 1, VIDEO 2 or VIDEO 3) for the sub-picture. The
selected source will be displayed in purple. ColorStream HD1
and HD2 can not be selected.
PPSOURCE
TV0
:
1
:
2
:
3
:
VI 1DEO
VI 2DEO
VI 3DEO
SELECTIONI
30
-
TO SELECT:
PPSOURCE
TV0:
1:
2:
3:
VI 1DEO
VI 2DEO
VI 3DEO
SELECTIONI
03
-
TO SELECT:
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0-3).
To turn PIP off:
Press PIP once or twice, depending on the size of the sub-picture
screen you selected.
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
TV
CABLE
VCR
CH RTN
PIC SIZE
EXIT
LIGHT
STOP SOURCE
ADV/
PIP CH
ADV/
PIP CH
FAV
FAV
PLAY PIP
REC TV/VCR REW FF
STILL LOCATE SWAP
FAVORITE
MENU/
STROBE
ENTER
PIP
PIP CH yz
SOURCE
Note:
• PIP/double-window can not be turned on
when the ColorStream input (HD1 or
HD2) is being viewed.
• You can not display the signal sources input
through the ANT-2 terminal as a sub-
picture.
Main window
Sub-window
Double-window modePIP mode
Example: PIP mode
PIP
BLOCKED
24
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 32 on page 4.
(continued on next page)