Filter
Top Products
32
TV operation
Press MENU and then press or to select
option.
Sound control adjustment/
Stereo and Second Audio Program (SAP)
Sound controls are factory preset but you can adjust them individually as follows:
The unit is equipped with a feature known as multi-channel TV sound or MTS.
MTS broadcasts greatly enhance TV viewing by bringing you programs with high
fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
To select desired sound
Listening to stereo sound
STEREO SAP
CH 013
STEREO
CH 013
Press AUDIO SELECT to select the desired sound.
STEREO
When the TV is turned on or a channel selection is
made, the “STEREO” will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT
to change to mono sound. The noise should be
eliminated. Press it again to return to the stereo sound.
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, “SAP” will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
Sound control adjustment
Press or to select “AUDIO”, then press .
1
2
After the desired setting is adjusted, press
MENU repeatedly until the menu screen is
cleared.
4
Press or to select the item you want to
adjust, then press
or to adjust the setting.
3
33
33
3 To return BASS/TREBLE/BALANCE control adjust-
ments to the factory preset levels
Press CANCEL while making sound adjustments.
BASS: Press or
to adjust the bass sound.
TREBLE: Press or
to adjust the treble sound.
BALANCE: Press or
to obtain an equal sound level
from both speakers.
SURROUND: Press or
to select “ON” or “OFF”.
ON: The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
STABLE SOUND
: Press or
to select “ON” or “OFF”.
ON: The StableSound
®
feature limits the highest
volume level to prevent extreme changes in
volume when the signal source is changed.
OFF: Normal sound.
SAP
: Press or
to select “ON” or “OFF”.
ON: SAP is available.
OFF: SAP is not available.
Broadcast SAP setting Audio display
MONO OFF MONO
ON MONO
STEREO OFF STEREO MONO
ON STEREO MONO
MONO+SAP OFF MONO
ON SAP
STEREO+SAP OFF STEREO MONO
ON SAP
CANCEL
/ / /
MENU
AUDIO SELECT
5W50101A [E]p27-32 2/22/06, 6:42 PM32