Toshiba SD-4205 DVD Player User Manual


 
27
Basic playback
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
the PLAY button.
Alternatively press the jog control during normal
playback.
To resume normal playback, press
the jog control again.
Sound is muted during still mode.
To stop playback
Press STOP.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high resolution
pictures on these discs include a lot of information. While the amount of noise depends
on the TV you use with this DVD video player, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
DVD
VCD
CD
The
DVD
VCD
CD
icons on the heading bar show the playable discs for the
function described under that heading.
DVD
: You can use this function with DVD video discs.
VCD
: You can use this function with VIDEO CDs.
CD
: You can use this function with audio CDs.
About the screen saver
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD video
player automatically appears (when Screen Saver is
set to On
60
). To turn off the screen saver, press the
PLAY button.
Automatic Power Off function
If the DVD video player is stopped, or the screen saver
is engaged for approximately 20 minutes, the DVD
video player will automatically turn itself off.
HDCD (High Definition Compatible Digital
®
)
HDCD
®
(High Definition Compatible Digital
®
) is a
recording system that has improved audio CD sound in
dynamic range, sound field reproducibility and vocal
acoustics.
This DVD video player is equipped with an HDCD
decoder. The HDCD indicator illuminates when playing
an HDCD-encoded audio CD.
®
, HDCD
®
, High Definition Compatible Digital
®
and
Pacific Microsonics are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States
and/or other countries. HDCD system manufactured under
license from Pacific Microsonics, Inc. This product is
covered by one or more of the following patents: United
States: 5,479,168, 5,638,074, 5,640,161, 5,808,574,
5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia
669114. Other patents pending.
Notes
Do not press against the tray when it is opening. This can cause damage to the players transport
and disc holder.
For your safety, if the disc holder is restrained during opening or closing, the tray operation will
stop automatically. Do not push on the disc tray to close it. Always use the OPEN/CLOSE button.
Do not move the DVD video player when discs are loaded in the player. Damage may occur to the
discs as well as the players transport and disc holder.
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button on your remote control once the movie is completed.
PAUSE/STEP
STOP
Jog control
PAUSE/
STEP
STOP
PLAY
DISC SKIP
DISC SELECT
MENU
1
2
TOP MENU
Cursor control/
ENTER
DISC SKIP
POWER
DISC SELECT
DOWN UP
12345
PAUSE
SKIP
STOP PLAY
OPEN/CLOSE
ENTER
TOP MENU
MENU
RETURN