12
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record any channels through the cable box.
You will need to:
• set TV channel 3 or 4 to receive video signals.
(See page 11.)
• set VCR channel to the output channel of the
cable box, and select a desired cable channel
on the cable box.
• while the VCR is turned off or the “VCR”
indicator is not lit in the VCR display, set TV
channel to the output channel of the cable box.
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record an unscrambled channel while watching
another unscrambled channel (only when you
connect a cable-compatible TV).
• A/B switch “A”:record and watch an
unscrambled channel which
comes bypassing the cable
box.
• A/B switch “B”:record and watch a scrambled
or unscrambled channel coming
through the cable box.
Incoming cable
Cable box
OUT
IN
A/B switch
CH
OUT
(
TO TV)
IN
(
FROM ANT.)
OUT IN
VIDEO
AUDIO
34
RF
Cable box
A
B
A
B
A
B
CH
OUT
(
TO TV)
IN
(
FROM ANT.)
OUT IN
VIDEO
AUDIO
34
RF
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable
box.
• turn on the cable box and select cable channel 3
or 4 according to the output channel of the VCR.
• to record a channel while watching another,
press
TV/VCR
on the remote control to turn off
the “VCR” indicator in the VCR display and select
a desired cable channel on the cable box.
Connections (continued)
CH
OUT
(
TO TV)
IN
(
FROM ANT.)
OUT IN
VIDEO
AUDIO
34
RF
CH
OUT
(TO TV)
IN
(FROM ANT.)
OUT IN
VIDEO
AUDIO
34
RF
This set-up will enable you to:
– watch or record a channel through the cable
box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
• press
I.SELECT
so that the VCR display
shows “L1”.
Cable box
Incoming cable
Cable box
OUT
IN
W-415/ENG (10-18) 11/12/01, 13:3312