Filter
Top Products
20
PLAYBACK
Variable Speed Playback
You can play back a tape at various tape speeds.
Picture Search
A tape runs at 5 times or 7 times the normal playback speed so
that you can quickly locate a particular scene.
1
Press
FF
or
REW
during playback.
The tape runs at 5 times the normal playback speed.
2
To change the tape speed to 7 times the normal playback
speed, press and hold
FF
or
REW
.
If you release it, the tape speed returns to 5 times.
Note
If you press
FF
or
REW
during picture search, the mode changes to fast-
forwarding or rewinding.
To resume normal playback
Press
PLAY
Still Picture
A picture freezes so that you can watch closer.
1
Press
PAUSE/STILL
during playback.
The picture freezes.
To resume normal playback
Press
PAUSE/STILL
again.
Notes
• The still mode is automatically cancelled after about 5 minutes and returns to
normal playback.
• The still picture may shake if a picture of a fast-moving object or scene is
frozen. This is not a defect in the unit.
Adjusting Still Picture Stability
If the still picture is distorted or flickers, hold down one of
CH/TRK
until
the picture becomes stable.
Note
The distortion of the still picture may not be eliminated completely.
78
0
100
9
65
23
4
1
STOP
SLOW
PAUSE/STILL
CANCEL
A.SELECT
EJECT
PROG. ENTER
TIMER
TV VOL
CH/TRK
REC
SP/SLP
DISPLAY
TV/VCR
COUNT RESET
REMAIN/
COUNTER
I.SELECT
POWER
VCR TV
CURSOR
CM SKIP
PLAY
FFREW
PAUSE/STIL
L
REW
PLAY
FF
SLOW
CM SKIP
Commercial Movie Skip
You can skip a portion of playback you do not want ( such as a
commercial ) and then return to normal playback.
1
Press
CM SKIP
during playback.
The VCR will automatically search forward for 30 seconds to
a maximum of 3 minutes ( six presses ) and then resume
normal playback.
W-622 Eng(19-23) 2/28/02, 2:57 PM20