Toshiba W-704C VCR User Manual


 
13
PREPARATION
This set-up will enable you to:
watch an unscrambled or scrambled channel
while recording it.
record any channels through the cable box.
You will need to:
set TV channel 3 or 4 to receive video signals.
(See page 11.)
set VCR channel to the output channel of the
cable box, and select a desired cable channel
on the cable box.
while the VCR is turned off or the “VCR”
indicator is not lit in the VCR display, set TV
channel to the output channel of the cable box.
This set-up will enable you to:
watch an unscrambled or scrambled channel
while recording it.
record an unscrambled channel while watching
another unscrambled channel (only when you
connect a cable-compatible TV).
A/B switch “A”: record and watch an
unscrambled channel which
comes bypassing the cable box.
A/B switch “B”: record and watch a scrambled
or unscrambled channel coming
through the cable box.
A/B switch
This set-up will enable you to:
watch or record a channel through the cable
box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
press
I.SELECT
so that the VCR display
shows “L1”.
A
B
A
B
A
B
Cable Box
Cable Box
OUTIN
Cable
Box