Filter
Top Products
33
RECORDING
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Set “TV/CATV” on the CH MEMORY screen to “CATV” (page 16).
(Example)
(Continued)
Cable Box Set-up
1
Press
PROG.
to display the MENU screen.
2
Select “PRESET” using
FF
or
REW
, and press
ENTER
.
3
Select “CABLE BOX/DSS” using
PLAY/x2
or
STOP
, and
press
ENTER
.
4
Select “NO” or “C.BOX” using
FF
or
REW
according to your
connection type.
NO: • Type A
• Type C (A/B switch “A”)
• Cable channels will be selected using
CH/TRK
on the remote control or
CHANNEL
on the VCR.
→ Go to step 8.
C.BOX: • Type B
• Type C (A/B switch “B”)
• Type D
→ Go to step 5.
5
Select “OUTPUT CH” using
PLAY/x2
or
STOP
, and enter
either of the following according to your connection.
Type B, C: the output channel number of
your cable box using
number buttons
.
(Usually 3 or 4. Check the rear of the
cable box.)
Type D: the line input mode “L1” using
I.SELECT
.
6
Select “CONTROL” using
PLAY/x2
or
STOP
, and set to “ON”
or “OFF” using
FF
or
REW
.
ON: if your cable box is remote-
controllable.
• Cable channels will be selected by
CH
(CABLE BOX)
on the remote control.
The VCR can change the cable
channel to the desired one when timer
recording or VCR Plus+ C system
recording starts.
→ Go to step 7.
OFF: if your cable box is NON remote-
controllable.
• Cable channels will be selected by the
own channel selector of the cable box.
The VCR channel should be set to the
output channel of the cable box.
→ Go to step 8.
3
®
USE no C. Box DSS
PLAY/x2,
STOP
PROG. ENTER
SLOW
PLAY/x2
PAUSE/STILL
REW FF
CURSOR
STOP
123
4
56
7
8
9
CANCEL
A.SELECT
EJECT
VC-717
0
100
VCR Plus+
7 8
9
6
5
2 3
4
1
CURSOR
STOP
100
100
REW
FF
ENTER
PROG.
Number
buttons
I.SELEC
T
CH
CABLE
BOX
USE no C. Box DSS
OUTPUT CH 2 CH
COnTROL Off on
USE no C. Box DSS
OUTPUT CH 3 CH
BRA
n
D TYPE no. 1
CO
n
TROL Off on
USE no C. Box DSS
OUTPUT CH 3 CH
COnTROL Off on
USE no C. Box DSS
OUTPUT CH 3 CH
CO
n
TROL Off on
W-717/Eng (24-40) 1/3/02, 5:46 PM33