Filter
Top Products
29
RECORDING
To Record in S-VHS ET Mode
This VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
1
Load a cassette with the safety tab attached.
2
Press
TV/VCR
so that the “VCR”
indicator appears in the VCR display.
3
Select a channel to record with
CHANNEL
on the VCR, or
CH/TRK
or
number buttons
on the remote
control.
If you see “L1” or “L2” in the VCR display, press
I.SELECT
so that the
channel number appears.
• If you record cable channels via the cable box, make the output
channel number of the cable box or “L1” appear, depending on your
connection. (See pages 11 – 13.)
4
Press
SP/SLP
to select the
recording tape speed.
SP: Suitable for general recording with
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.
5
Press
PROG.
to display the MENU screen.
6
Select “SET UP” using
FF
or
REW
, and press
ENTER
.
7
Press
STOP
repeatedly to go to screen 2 of SET UP page to
select “S-VHS ET”, and set to “ON” using
REW
or
FF
.
“S-ET” indicator will appear on VCR display when “ON” is selected.
8
Press
REC
on the VCR, or
simultaneously press both
REC
on
the remote control.
The S-VHS ET recording mode will be
automatically selected.
9
Press
STOP
to stop recording.
Note
S-VHS ET does not work with S-VHS tapes.
A.SELECT
REMAIN
COUNTER
COUNT
RESET
POWER CH DOWN CH UP
DNR
213
546
879
0
100
ENTER
VCR Plus+
REW FF
PLAY/x2
STOP
2
3
I.SELEC
T
5
6
4
VCR
SLP
CH
POWER
VCR
SLP
POWER
VCR
SLP
CH
POWER
VCR
SLP
REC
CH
POWER
REC
TIMER