Filter
Top Products
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
15
Press
Q
to select On or Off timer. Use the
number buttons to set the required time. For
example, to switch the TV off in one and a half
hours enter 01:30.
If setting the Off timer, press EXIT to finish. If
setting the On timer, press
Q
to select On
programme, enter the programme position
number required, then press
i
to put the TV into
Standby. The GREEN On timer indicator on the
front of the TV will now be lit.
Any equipment connected with Scart leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the TV can be
switched on at any time by pressing
i
. The
Green On timer indicator will remain on until the
set time period as passed when the TV will go to
the chosen channel. This feature can help to
avoid missing favourite programmes.
To cancel the On timer, enter zero in each
position including the programme position.
The timer, time display, panel lock
and stereo/bilingual transmissions
The time display facility allows the current time to be seen
on the TV screen.
Press
8
/
9
whilst watching a normal TV broadcast to
see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
Stereo… Press
OI/II to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press OI/II to select Sound A, Sound B or
Mono.
From the Feature menu select Panel Lock and
choose On or Off using
S
or
R
.
The TV can be set to turn itself On or Off after a
certain time.
Panel Lock disables the buttons on the front of the TV.
All buttons on the remote control can still be used.
The Timer
Panel lock
Stereo and Bilingual transmissions
The Time Display
1
1
2
3
Press MENU and
S
or
R
to select the Timer menu.
When Panel Lock is ON, a reminder will appear
when any of the front panel buttons are pressed.
Once the set has been switched off it can
ONLY be brought out of standby using the
remote control.
4
Timer
Off timer 00:00
On timer 00:00
On programme 1
EXIT
To Exit
fe
Select
zx
Adjust
Use keys 0-9 to set the time
Feature menu
EXT2 Input
z
Video
x
EXT2 Output
z
EXT1
x
Horizontal Position
zx
Width
zx
Vertical Position
zx
Height
zx
Panel Lock
z
On
x
Automatic Format
z
Off
x
Blue Screen
z
On
x
EXIT
To Exit
fe
Select
zx
Adjust