Filter
Top Products
Receiver (RX) Unit
Link LED: This LED indicator will illuminate once the CAT6 cable has been
properly connected between the Transmitter and Receiver units
Power LED: This Power LED indicator will illuminate when the receiver is
connected to its 5VDC power supply that is plugged into a wall outlet.
RJ45 Output: Connect a CAT6 cable terminated with an RJ45 modular plug
into this port
Power Input: Connect the 5VDC power supply to the receiver of the HX1C6-
PRO. Then connector the adapter to an AC outlet.
HDMI Output: Connect to the HDMI input of your display or sink device with
an HDMI cable.
IR Extender Input: Connect IR receiver cable (included) to this input. Place the
eye of the receiver in front of the display, then use the existing remote to
control the source equipment.
4
1
2
3
5
4
6
2 1 3 4 5 6