Filter
Top Products
3
5. Receiver Operational Controls and Functions
5.1 Front Panel
5.2 Rear Panel
1
HDMI OUTPUT
1. HDMI OUTPUT:
Connect the HDMI output to the HDMI input of your display.
DDC VIDEO
DC 5V
CAT5 INPUT
1 2 3
1. DDC INPUT:
Connect the DDC input to the DDC output of the transmitter unit
using CAT5/CAT5E/CAT6 cable.
Note: If it’s known that the DDC or HDCP data are not required for
both source and the display, you can use a single CAT5/CAT5E/CAT6
cable for the VIDEO connection only.
2. VIDEO INPUT:
Connect the VIDEO input to the VIDEO output of the transmitter unit
using CAT5/CAT5E/CAT6 cable.
3. POWER:
Plug the 5VDC power supply into the unit and connect the adaptor to
AC wall outlet.
1
1
1 2 3
1
2
3
HXC5_MANUAL.indd 5 10/23/07 2:25:04 PM