Filter
Top Products
4. Operation Controls and Functions
4.1 Transmitter
IR Transmitter: Connect IR blaster cable included in box to this input. Place the
eye of the blaster in front of the source equipment. The IR blaster accepts a
frequency range from 20 KHz to 60 KHz.
HDMI Input: Connect the HDMI cable from your source's HDMI output
Power 5V: Connect the 5 volt power supply included in box
DDC CAT6 Output: Connect the DDC output of the Transmitter to the DDC
input of the Receiver using CAT6 cable. CAT5E cable can be used if available
with the same result.
VIDEO CAT6 Output: Connect the Video Output of the Transmitter to the
Video input of the Receiver using CAT6E / 23AWG / solid cable. Note: using a
Cable with different specification may result in different distance capabilities.
1
2
3
POWER 5V
VIDEO DOC
HDMI INPUT
Transmitter
1
2 3
CAT6 OUTPUT
4 5
1
2 3 4 5
POWER 5V
HDMI OUTPUT
VIDEO DOC
CAT6 INPUT
3
4
5