Tripp Lite B125-101-60 TV Cables User Manual


  Open as PDF
of 4
 
TMDS
UP TO 150 ft. (Cat6)
UP TO 100 ft. (Cat5)
LOCAL
TRANSMITTER
BLU-RAY
1080p (6o Hz)
1080p (6o Hz)
REMOTE
RECEIVER
DDC
B125-101-60 Installation Diagram
2
Installation and Operation
Refer to the installation diagrams below as you perform these steps.
Note:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a
gauge size higher than 24Awg will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24Awg, solid wire cabling.
3. Make sure the power to all devices you are connecting to is turned off prior to
installation.
Product Features
•B125-101-60–Extenda1080p(60Hz)signalupto150ft.using
Cat6cabling,orupto100ft.usingCat5cabling
•B125-101-60-WP–Extenda1080p(60Hz)signalupto125ft.
usingCat6cabling,orupto75ft.usingCat5cabling
•Supportsupto7.1channelsurroundsoundaudio
•Built-inEqualizationcontroltoadjustthevideoimage
•HDCPand3Dcompatible
Optional Accessories
•N202-SeriesCat624Awg,solidwirepatchcables
•P568-SeriesHighSpeedHDMIcables
201109193-93-3144.indd 2 10/7/2011 2:29:40 PM
 previous next