Filter
Top Products
4
1. Separate the VESA Plate from the Wall Mount
2a. Mount on Wood Stud Wall
3
Find and mark
the exact
location of
mounting holes
Screw the wall
plate onto the
wall
Drill pilot holes
WARNING
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
1
2
D6 Washer
Anchor Bolt
13-09-231-9332A1-EN.indd 4 10/31/2013 11:50:16 AM