Tripp Lite P116-000-HDMI TV Cables User Manual


  Open as PDF
of 8
 
3
Note: Make sure that all devices you are connecting are powered off prior
to installation.
1
Connect the video source to the VGA input port on the unit.
Note: A Component (RGB) Video to VGA Adapter cable is required for
connection of a Component source.
2
ConnecttheaudiosourcetotheRed/WhiteRCAinputportsonthe
unit.
3
Ifconnectingacomputer,turntheHDCPswitchontheunitoff.If
connectingaDVDplayer,turntheHDCPswitchon.
4
ConnecttheHDMIdisplaytotheHDMIoutputportontheunit.
5
Connect the power supply to the unit, and then plug it into an
appropriatepowersource,suchasaTrippLiteSurgeSuppressor,Power
DistributionUnit(PDU),orUninterruptiblePowerSupply(UPS).
6
Powerontheconnectedsourceandmonitor.TheLEDnexttothe
VGAinputportwillilluminateBluetoindicatethatitisconnected
toapoweredonsource.TheLEDnexttotheHDMIoutputportwill
illuminate to indicate that it is connected to a powered on monitor.
TheoutputportLEDilluminatesRedwhentheHDCPswitchison,and
BluewhentheHDCPswitchisoff.
Installation
13-05-269 93-32B9-EN.indd 3 6/18/2013 3:28:21 PM
 previous next