Filter
Top Products
5
SET UP YOUR BTS150 SPEAKER
Charge the Battery
Slide the main power switch to the ON position (see page 8).1.
Insert the adapter’s mini USB connection into your speaker’s USB slot (see page 8).2.
Plug the adapter into your computer.3.
The LEDs ash blue while the battery is charging (charge time = 7.5 hours on a 4.
completely empty battery). The LEDs turn solid blue when the battery is fully charged.
Charge the battery fully before using the speaker.
Turn on Your Speaker
When you turn on your speaker for the rst time, it automatically goes into pairing mode.
The LEDs rapidly ash red and blue while in pairing mode. After you pair Bluetooth devices
to your speaker, the next time you turn it on it searches for these paired devices and then
moves into a standby state.
Slide the main power switch to the ON position.1.
Press and hold 2.
for at least 3 seconds. A “power on” tone sounds.
The LEDs ashes blue and red slowly while looking for Bluetooth devices. It remains 3.
steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps ashing.
BTSC150 OM.indd 5 12/5/11 4:48:29 PM