Uniden TL32WRA-W Flat Panel Television User Manual


 
Yellow
White
Red
Green
Blue
Red
White
Red
White
Red
S Video cable
Video & Audio
Cable
Component
Video Cable
Audio Cable
Audio cable
HDMI cable
HDMI cable
DVI to HDMI
cable
Audio cable
Example of connections
HDMI jacks
are connected
If DVI jack is installed;
HDMI (with DVI to
HDMI cable) and Audio
jacks are connected
Audio input jacks
are connected
Component and Audio
output jacks are
connected. D-Terminal
connection can also be
used here instead of
Component connection.
If S-Video jack is installed;
S-Video and Audio
output jacks are connected
If there is no S video jack;
Video and Audio output
jacks are connected
Before connecting optional equipment, be sure to turn this TV and the optional equipment off.
The plugs and jacks for video and audio connections are color-coded. Connect cables so that the cable
plugs match their respective color of the connection jack.
Connect only video and audio signals to the video and audio jacks. Do not connect other signals. Doing
so may cause malfunction.
For details on how to use and connect equipment, refer to the User’s Manual of the respective
equipment.
Connection Precautions
Insert plugs as far as they can go. Incomplete connections cause noise.
When unplugging plugs, do not pull on the cord. Hold cords by their plugs.
To prevent mutual interference when two or more pieces of equipment are connected, turn equipment
that is not in use off.
If noise appears in the video or audio of the TV and connected equipment, move the equipment
away from the TV.
Note
Connecting Other Equipment
When no other equipment is to be connected, proceed to Chapter 3 “Watching TV” page
24). You can start enjoying TV programs right away.
VIDEO 1 input
This input is used for connecting an
S1 VIDEO jack to optional equip-
ment having an S VIDEO terminal.
e.g.) Video camera, DVD player,
VCR, etc. with an S jack
VIDEO 2 input
This input is used for connecting
optional equipment by AV cable.
e.g.) VCR, TV game machine,
video camera, etc.
VIDEO 3, 4 input
This input is used for connecting op-
tional equipment with a component
video jack.
e.g.) Digital tuner, DVD player, etc.
Audio output
This output is used for recording
audio from the TV or for connecting
to an external amplier.
HDMI 1, 2 input
This input is used for connecting
optional equipment with an HDMI
jack.e.g.) Digital tuner, etc. When
connecting from a DVI source,
connect the Audio cable too.
* About connection cables
Connections are also made using the cables specied for the various
equipment (e.g. video camera) to be connected. For details on how to
make connections, refer to the User’s Manual for the respective equipment.
To S VIDEO input jack Commercially available
SET UP
20