Unisen LT-52151 Flat Panel Television User Manual


  Open as PDF
of 96
 
58 5. NetCommand IR Control
Special Operation Methods
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Power On Manual Power On/Off
Usefordevicesthathaveonlyone
POWER
key.
Press1.
ACTIVITY
.
Press2.  tohighlighttheiconforthe
devicetobepoweredonoroff.
Withthe3. Activitymenustilldisplayed,press
POWER
tosendthepowersignal;youmay
needtopress
POWER
twice.
Note: Ifyoupress
POWER
withouttheActivity
menudisplayed,theTVwillturnoff.
Press4.
ENTER
toswitchtheTVtothedevice.
Power On
Power Off
Automatic Power On/Off
Thisfeatureisonlyfordevicesthathaveseparate
POWER ON
and
POWER OFF
keysontheiroriginal
remotecontrols.Ifyourdevicedoesnothavea
separate
POWER OFF
key,donotusethePower
Offlearningposition;useonlytheManualPower
ON/OFFmethoddescribedabove.
IntheNetCommandLearnscreen:
a. “Learn”thePower Oncommandinthe
Power Onlearningposition.
b. “Learn”thePower Offcommandinthe
Power Offlearningposition.
To Power On the Device•
Press1.
ACTIVITY
.
Press2.  tohighlighttheiconfor
thedevicetobepoweredonoroff.
Press3.
ENTER
toswitchtheTVtothe
deviceandNetCommandwillsendthe
Power Oncommandtothedevice.
To Power Off the Device•
WhenyouturntheTVoff,theTVsendsall
learnedPower Offcommandstoalldevices.
Menu Displaying a Menu for the Current Device
“Learn”the
MENU
keyontheoriginalremoteinthe
Menulearningposition.
Press
MORE
andthen
1
tosendthemenu
commandtothecurrentdevice.
Guide Displaying the On-Screen Program Guide
(cable box or satellite receiver)
“Learn”the1.
GUIDE
keyontheoriginalremotein
theGuidelearningposition.
Learnthe2.
PAGE
UP
and
PAGE
DOWN
keysofthe
originalremoteinthePage UpandPage
Downlearningpositions.
Whilewatchingthedevice,press1.
GUIDE
to
displaytheguide.
Press2.
PAGE
UP/DOWN
(  )tosendthePage
Up/Dncommandsfortheguide.
Operating NetCommand-Controlled Devices
Controlling Most Device Types
AsanexampleofNetCommandcontrol,ifyouare
watchingyourcableboxandyouwishtotunetothe
nextchannelhigher,press
CHANNEL UP
.NetCommand
thensendsthe“learned”channel-upcontrolsignalto
thecablebox.
PerformNetCommandsetupforthedeviceas
1.
describedinthischapter.
Whenyouwishtousethedevice,press
2.
ACTIVITY
.
Press
3.
 tohighlighttheiconforthedevice.
Press
4.
ENTER
toswitchtheTVtothedevice.
Note: ifyouhavesetupautomaticinputswitchingfor
theA/Vreceiver,theA/Vreceiverwillautomati-
callyswitchtothecorrectinputforthedevice.
Tooperatethedeviceusingthe
5.
TV’sremote
control,pressthesidebuttontoputtheremote
controlinto
TV
mode.
Pointtheremotecontrolatthe
6.
TV(notthedevice)
andpressthekeyforthedesiredfunction.
Pressthe
7.
MORE
keytoaccessadditionalkeyfunc-
tionsyoumayhave“learned”forthedevice.
Downloaded From TV-Manual.com Manuals
 previous next