Filter
Top Products
www.urcsupport.com
14
F
or example, to find out which code is operating your TV
:
5. To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., AUX, DVD, CBL, or STB) for the device
you are checking. Write down the codes in the
appropriate boxes on page 11.
1. On the remote control, press TV once; it blinks
once. Then press and hold SET UP until the TV
key blinks twice.
2. Enter 9 9 0. The TV key blinks twice.
3. To view the code for the first digit, press 1
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 11.
NOTE: If a code digit is 0, the selected mode key does
not blink.
4. Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, 4 for the fourth digit, and 5
for the fifth digit. Finish writing down the
code in the TV Code boxes on page 11.
Generic Pioneer Charter OCAP.fm Page 14 Friday, July 20, 2007 1:28 PM