Filter
Top Products
Page 9
CCP MAC Address Discovery
1.Once the KP-4000 has been connected to the network, notate the
MAC address located on the KP-4000 under the magnetic cover
plate.
2. Open the Complete Control Program editor.
3. Select the Program tab then press Configure Home.
4. Add a KP-4000 Network Keypad from the Remotes section and
the properties window opens. Note: Adding a MRX-1 base station
to communicate with a KP-4000 is recommended.
5. Within the Network Information field, press the Discover button
to select the unique MAC address of your unit.
6. The Discover window opens to reveal KP-4000’s connected to the
network. Highlight the MAC address which matches the KP-
4000’s label. Then press Apply.
7. Begin programming your customer’s file.
KP-4000 NETWORK KEYPAD