Filter
Top Products
32
From the RF Settings Menu, select IR/RF.
Decide whether you are changing the Signal for all devices or just
one of the devices of the Osiris.
Select ALL to change the signal settings to ALL
devices in the Osiris. Then, go to Step 4.
Select DEVIC to change the signal settings to
just one of the devices in the Osiris. Then, go
to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF set-
tings, then go to Step 4.
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
The Osiris
1
2
4
3
Both IR and RF will be output
Only IR line-of-sight
Only RF will be output
Save the new setting
Exit this Menu without changing
the IR/RF settings
Select a device
Page
Buttons
display the
other page
of devices.