Filter
Top Products
Page 5
TRC-780 OWNER’S MANUAL
Date/Time
The Date and Time are automatically sent from the
MRX-10 to the TRC-780. If you would like to
adjust the date or time you can do so on the
remote control. Note: Any Date or Time adjust-
ment made on the TRC-780 will automatically go
out to all the other remotes and keypads in the
system.
1. Change Date
: Tap the button beside Day, Month,
or Year, then use the numeric keypad to enter
in the new date information. When you are
finished, press the Save button.
2. Change T
ime
: Tap the button beside Hour of
Minutes, then use the numeric keypad to enter
in a new time. Set AM/PM by toggling the
button. When you are finished, press the Save
button.
3. Display Date/T
ime: The TRC-780 can display
either the Date or Time, but not both.
Select which one you would like to display.
Press the screen button next to Date or Time.
Once you are finished, press the Save button.
Erasing and Resetting
WARNING! Only use this button when instructed by Technical
Support. It resets the memory of the TRC-780 to
the factory condition. All your programming
will be lost!
To set the remote to its factory default setting,
press "Erase." A secondary screen opens and
requires your confirmation.