Venturer KTS230 DVD Player User Manual


 
- 21 -
Programmable memory
The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed
playback.
Title / Chapter programmed playback
1.Press the MEMORY button while the disc is stopped.
2.Enter the title numbers in
- -
. Use or button to move the highlight to chapter and enter the chapter numbers
in
- -
.
3.Use , , or button to move to the other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Notes :
If you press the STOP button, the programmed selections will be cleared.
If you press the CLEAR button while you are entering a title or chapter, the currently entered numbers will be
erased and you can reset the numbers again.
3.Use , , or button to other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Notes :
If you press the CLEAR button while you are entering a track, the currently entered numbers are erased and you
can reset the numbers again.
When the unit is playing at program memory mode, the “MEMORY” will display on the display of unit.
Attention :
Programmable Memory cannot be used on CDG disc.
Track
CD / DVD programmable memory
Advanced
playback
Title
Chapter
Programmable memory
Track programmed playback
1.Press the MEMORY button while the disc is stopped.
2.Enter the track numbers in
- - -
.
DVD
CD
DVD