Filter
Top Products
12
CONNECTIONS
CONNECTING TO SOURCES WITH COMPONENT VIDEO OUTPUT
(DVD - ONLY 480I, 480P, 720P & 1080I ARE SUPPORTED)
This connection allows you to use an audio
amplifier and external speakers.
Connect the right (red) and left (white) audio
OUTPUT from this unit to the right (red) and left
(white) audio INPUT on your amplifier. Refer to
your amplifier’s user manual for more information.
Note :
To control the audio, both the TV and the
amplifier must be turned on, and the volume
of the amplifier must be set above 0, or you
will not hear any sound.
If you want to hear the volume of the amplifier
only. Press the volume – button of TV to
decrease the volume or press the MUTE button
of remote control to turn off the sound.
Devices with component video output must be
connected to the YUV input:
Connect the three video outputs (Y, Pb, Pr) from
the source to the corresponding video inputs on
this unit (Component video cable not included).
Connect the right (red) and left (white) audio output
from the source to the right (red) and left (white)
input on this unit (Audio cable not included).
Make sure you connect both audio and video from
the same source to YUV IN.
Note:
Please refer to the user manual for your component
video source for more information and connection
details.
CONNECTING AN AUDIO AMPLIFIER
PLV16151S1 VEN - WM CANADA.pmd 1/10/2007, 5:06 PM12